Support RS232, RS485, UDP Control 4CH DSP Digital Audio Matrix Audio Processor With AEC And Built In USB Sound Card
| 
MU44 Main Features: - Analog input channel: 4
- Analog output channel: 4
- Built-in two in two out USB sound card, support music playback, recording and soft video conferencing ,Such as: ZOOM, Tencent Conference, Dingding conference, etc.;
- Two channels independent AEC, tail time: 512ms, convergence rate: 60dB/S, echo cancellation amplitude: 60dB; Independent channel AFC (feedback suppression), using notch algorithm, sound transmission gain increase amplitude: 10dB; Noise suppression (ANS), signal-to-noise ratio increased by 18dB
- Eight-stage English parametric equalization provides five filter choices:
- Parametric, Lowshelf, Highshelf, Lowpass, Highpass;
- Provides customized operation interfaces for terminal users. A maximum of 30 devices can be managed on one interface.
- With the central control function, support RS232, RS485, UDP three control modes, can be the system power, signal switching, environmental control, audio control and other overall control, to achieve a key to open the system required functions.
|
| 
The DSP can use together with our control Panel: OLED screen consists of a 1.3” OLED screen and a knob. OLED screen display strategy is classified according to menu. There are totally three types of menus including menu, buttons and presets. Double click a OLED screen in design area of the screen to enter its detailed setting as shown below |
MU44 DSP Specification:
| Model No. | MU44 | | DSP Processing | ADI SHARC 21489@450 MHz SIMD | | Number of analog channels | 4 Input +4 Output | | Core Algorithm | Automatic mixing, feedback elimination(AFC), echo elimination(AEC), noise elimination(ANC) | | USB Port | 1 | | Input gain | 0/6/12/18/24/30/36/42/48 dB | | Digitalizing bit | 24bit | | Sampling Rate | 48k | | Frequency Response(20~20KHz) | ±0.5dB | | Phantom power | +48V/10mA max | | The Max level | +18dBu | | Input to output dynamic range | 110dB | | output to input dynamic range | 112dB | | Dynamic range(Analog) | 110dB | | Channel isolation @1kHz | 108dB | | Total harmonic distortion + noise | ＜-100dB@4dBu | | System delay | <3ms | | Input impedance (balance -type) | 5.4KΩ | | Output impedance (balance -type) | 600Ω | | Weight | 2Kg | | Size | 215x162x44mm | | Working Power Supply | DC12V | | |
Software:
Client network configuration
The default IP address of the processor is 169.254.10.227, and the subnet mask is 255.255.0.0. Please ensure that the IP address of the client host is in the same network segment as the processor, so that the client software can connect with the processor normally. (Note: Client software can modify the IP address of the processor after searching for the device. )
Download software
The installation software program of this machine is downloaded by accessing the processor of the same network segment in the LAN; Access the processor by entering the IP address of the device in the address bar of IE browser, find the download link and download the installation software locally to complete the installation; The factory default IP address of the equipment is 169.254.10.227, and the subnet mask is 255.255.0.0. Please add the address of this network segment to the PC first, so that the equipment can be connected normally. After the device is started, use the browser to access the address "http://169.254.10.227/".
Software login
After the client software is installed, open the software, click the device list, and view the IP list of the devices currently on the network. Click the network connection of the device you want to connect to, and then you can connect the device for software debugging. Please check the help documentation for more details (see Software Help Options).
Common troubleshooting
1. network connection failure: network connection failure is usually caused by different equipment network segments. if the LAN is different from the processor network segment, you can open the software through PC, click modify IP, and change the processor network segment to be consistent with the LAN, and then click network connection.
2. Current sound is output: Please check whether the processor is grounded well first, which usually requires the grounding screw on the left side of the back panel of the chassis to be connected with the metal casing such as cabinet through metal wires. If the problem still exists, please check the wiring of the input device. If the input device is unbalanced (two wires), please connect the "+"and "G" of the processor input interface.
Company Introduction:
FHB Audio was established in 2018,who is a technology-based enterprise integrating design, research and development, production, sales, and service, specializing in the production of digital signal processor, digital conference system, Dante products line, microphones, Digital Mixer, power amplifier etc., also can provide customers with a series of according to their requirements, mainly for conference, education, hotels and other application
The company has strong R&D technical strength and advanced production equipment, and has a complete product quality control system. From raw material input to cost delivery, all links are tested and quality tracked, so as to ensure reliable and stable quality
Through unremitting efforts, the scale of FHB has continued to expand, and our company has gathered a group of high-quality, first-class audio technology professionals. So far, our team has more than 100 employees, the product line has increased to 3, and the business is sold all over the world., and have obtained CE, ROHS certificate
FHB always adheres to the business tenet of "honesty-based", and pursues excellent quality, and constantly improves product quality and after-sales service system to achieve a win-win situation
Product Tags:
|
|
4CH Audio Signal Processor RS232 RS485 UDP Control Digital Matrix Processor In USB Sound Card Images
|
